Your source for premium Bonding & Assembly products
3M Panel Bonding Adhesive for DMS, 58115, is a two-part epoxy used to bond steel, aluminum, sheet molded compound (SMC), and fibreglass reinforced ...View full details
3M Scotch-Weld Epoxy Adhesive DP100 Plus has low viscosity, allowing for easy dispensing. It is flexible and bonds to a variety of materials such a...View full details
3M Scotch-Weld Epoxy Adhesive DP125 is formulated as a low odour, two-part epoxy with a 1:1 mix ratio. It has a 25 minute worklife and reaches hand...View full details
3M VHB Tape 5925 is a 25.0 mil thick very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a polyethylene (PE) fil...View full details
Manufacturer part # 7000049540 Minimum order qty 1 Line VHB Country of origin US Product type VHB Tapes
Scotch® Clear Mounting Tape is a clear, double sided conformable tape. It can be used on a variety of indoor surfaces that are clean, dry and smoot...View full details
3M Double Coated Tape 415M is a 4-mil (0.1 mm), double-coated tape with a polyester carrier and acrylic adhesive that offers a good balance of init...View full details
Draw Mark your pattern on the wall with a pencil and ruler or stencil. Then place a dab of paint in each section of the pattern to help you keep track of which colour goes where. Tape Place the tape...
Base colour Paint surface with your base colour. (The spaces you tape will remain this colour). Then wait at least 24 hours for the paint to dry. Pattern Now tape your painted surface with lines, stripes, zigzags, etc. Get creative...
Step by step Prepare surface Paint your basecoat and let it dry 24 hours, or skip this step and use an existing surface. Draw shapes Use a pencil to lightly draw your shapes on the surface. You can do this...